Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Pinellas Park
A new gate in Pinellas Park typically costs between $1,800 and $6,500 installed, depending on whether it’s a simple tubular steel pedestrian gate or a full automatic driveway system with an operator, safety edges, and a keypad. Most standard driveway gates in Pinellas Park run $2,400 to $4,800. We provide a written price before any work starts, so the number you approve is the number you pay. Call (850) 789-6299 for a free estimate.
We know this city well. Pinellas Park’s flat terrain, high water table, and salt-heavy air shape how gates fail here more than any brochure can explain. Our Gate Installation team sets posts deeper than code minimums and uses stainless steel hardware because we’ve seen what coastal corrosion does to standard zinc-plated parts within two years. When you call, a live person answers – 24 hours a day, every day.
Why Latch and Post Gate Repair Tampa Is Pinellas Park’s Preferred Gate Installation Company
We’ve been part of the Cedarwell family of gate specialists since 2009, and our focus is narrow on purpose: gate repair, gate installation, and electric gate repair. That’s the whole job. Every gate comes down to two parts – the latch that holds it and the post that carries it. That’s the work we focus on, and it means we’re not splitting attention between fencing, landscaping, and a dozen other trades.
Pinellas Park homeowners tell us the same things after we finish. The crew knocked before touching anything. Shoe covers went on at the door. Drop cloths protected the entry floor. We sent a photo of the clean-up before leaving. Those aren’t extras – they’re the Cedarwell C.A.R.E. values, and they’re part of every visit at no extra charge.
Our technicians are background-checked, uniformed, and factory-trained on the brands families in Pinellas Park actually own: LiftMaster, FAAC, BFT, and more. Cody Beckman, who leads our team, holds every job to one standard: if it isn’t right, we make it right. The 365-Day Done Right Promise covers every installation we do. No argument, no fine print.
Styles & brands we work with
Automatic Gate Installation in Pinellas Park
Automatic gate installation in Pinellas Park usually makes sense when a homeowner wants to stop getting out of the car in the rain, or needs a controlled entry for kids and pets. The job includes the gate panel, hinges, the operator (often a LiftMaster or Mighty Mule), a keypad or remote, safety photocells, and the electrical run from the house to the gate. In Pinellas Park, we also account for a critical local factor: the operator board needs protection from the salt air that drifts in from Tampa Bay and the Gulf. A basic single swing gate with automation typically runs $3,800 to $6,200 here. A sliding automatic gate can reach $7,500 or higher depending on track work and panel size.
What to expect on installation day
We show up with the gate, the operator, the hardware, and a plan. The crew lays drop cloths if the work requires walking through the house, and every technician wears shoe covers. The electrical run is handled by our team – you don’t need to hire a separate electrician for most standard installations. We test the entrapment protection, explain how the remote and keypad work, and leave the site cleaner than we found it.
Wet season post work
In Pinellas Park, the difference between a gate that sags in August and one that swings true for a decade usually comes down to what’s underground. We set posts with extra concrete and, where the water table is high, we use deeper footings than code minimums. The goal is simple: the gate should not move when the soil does.
Gate Installation Services in Pinellas Park
Gate installation services in Pinellas Park cover everything from replacing a rusted chain-link gate on a 1960s concrete block home to building a new double driveway gate with an automatic opener. Many homes in this city were built between the 1950s and 1970s, and a lot of those original gates are still standing – barely. The standard zinc-plated hinges and lag bolts used decades ago are no match for Pinellas Park’s humidity and salt. When we install a new gate, we use galvanised or stainless hardware as the default, not the upgrade.
Driveway gates for older custom openings
If your driveway opening is an unusual width – common in older Pinellas Park neighborhoods and manufactured home communities – we measure it, build the gate to fit, and select an operator rated for the panel’s weight and cycle frequency. No forcing a stock-size gate into a non-standard opening. The result is a gate that closes fully and latches correctly, every time.
Pedestrian and security gates
Pedestrian gates get less attention than driveway gates, but they fail just as often – usually at the latch or the hinge post. We install new tubular steel or aluminum pedestrian gates with hardware that survives the coastal environment, and we can add a keypad or card reader if the gate secures a backyard or pool area. For security gates at the front of a property, we discuss UL 325 entrapment protection requirements and make sure every system meets them.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pinellas Park
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters when a Pinellas Park customer needs a new operator for an older gate, because we know which control boards pair with which arms and what retrofit kits actually work. We keep common parts and hardware on our trucks, which means fewer return trips for Pinellas Park customers. If you already own a LiftMaster or Mighty Mule opener and you want a new gate built around it, we’ll match the gate to the operator’s limits rather than selling you equipment you don’t need.
Common Gate Installation Problems We See in Pinellas Park Homes
- Hinge posts rotted through at the base. This is the most common failure in Pinellas Park, especially on 1950s-1970s concrete block homes. Water pools at the post base, salt accelerates the rust, and eventually the post snaps below ground level. The gate panel may look fine, but the post is done.
- Gates that sag every summer. Pinellas Park’s water table sits just a few feet below most lots. When summer rains saturate the soil, footings move, and the gate starts dragging or binding. The fix is a deeper post with more concrete – not just tightening bolts at the hinge.
- Dead operator boards on otherwise fine gates. The mechanical gate still swings, but the automation won’t respond. Coastal corrosion eats the control board connections. We see this constantly on older systems from the brands that were popular in the 1990s and 2000s.
- Obsolete openers on custom-width gates. Many Pinellas Park driveways are narrower or wider than today’s standard sizes. When the original operator dies, a generic replacement won’t always fit the custom gate’s weight and geometry. We spec the right operator for the panel, not the cheapest one on the shelf.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Pinellas Park, FL
Here are honest numbers for Pinellas Park. A basic tubular steel pedestrian gate runs $350 to $850 installed. A single swing driveway gate without automation is typically $1,200 to $2,800. Add an automatic operator and keypad, and the range moves to $3,800 to $6,200. Sliding driveway gates cost $4,500 to $8,500 depending on track work and panel size. Double swing gates with automation typically run $5,500 to $9,000. These figures include the gate, hardware, installation, and our cleanup routine. The exact price is written down before we start – always. Call (850) 789-6299 for a free estimate, and we’ll measure your opening and give you a number the same visit.
We Also Serve Cities Near Pinellas Park
Our Pinellas Park customers often ask if we cover nearby communities, and the answer is yes. We work regularly in Tampa, Riverview, Seffner, and Tarpon Springs. Each area has its own soil and corrosion conditions, but the standard of work stays the same: written price first, shoe covers inside, drop cloths down, and a photo of the clean-up before we leave.
Serving Pinellas Park, FL - Our Local Coverage Area
We’re based in the Pinellas Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Pinellas Park
Pinellas Park sits close to both the Gulf and Tampa Bay, so the air carries more salt than inland parts of the metro – and the city’s flat, low elevation means that salty humid air hangs over properties rather than moving off quickly. Standard zinc-plated hinges and lag bolts in this environment typically fail within 2 to 3 years. The fix we recommend is galvanised or stainless steel hardware from the start, plus a post wrapped at the base to keep standing water off the steel. Call (850) 789-6299 if your current gate has hinge rust you can already see.
Code minimum in Florida is typically 24 to 30 inches, but in Pinellas Park we set gate posts at a minimum of 3 feet, and 4 feet for anything carrying an automatic operator. The water table here is only a few feet below the surface in many neighborhoods, and summer saturation makes shallow footings shift. A deeper post with a proper concrete collar holds the gate straight through the wet season. If your gate sags every August, the post depth is usually the problem.
Yes, and we do it regularly. Many manufactured home communities in Pinellas Park have shared or private entry gates built to non-standard widths, and the original operators are often long discontinued. We measure the gate’s weight and length, then match it with an operator rated for that load – usually from LiftMaster or Mighty Mule. We also check the post depth before mounting anything, because a weak post will tear out under the opener’s force. The written price covers the complete job: operator, hardware, safety photocells, and testing.
UL 325 is the safety standard that requires automatic gates to reverse or stop if a person, child, or pet gets caught in the gate’s path. It applies to every new automatic gate installation in Pinellas Park, and it means your system needs working photocells, a reversing mechanism, and audible alarms in certain configurations. We handle this on every installation – it’s part of the job, not an add-on – and we test the system in front of you before we leave.
Yes. For homes within a mile or so of the bay, unpainted galvanised steel or stainless steel is the only choice we’d recommend for hinges, bolts, and posts. Powder-coated aluminum is a good panel option because it resists salt corrosion well, but the fasteners and hinge pins should still be stainless. A painted mild steel gate will look fine for a year or two, then the rust will bleed through at the welds and the hinge line. If you want the gate to outlast its first operator, coastal hardware is the right call.
Call Latch and Post Gate Repair Tampa for Your Pinellas Park Gate Installation
If you’re ready to replace a rusted gate, automate your driveway, or get a straight answer on what a new gate in Pinellas Park should cost, call (850) 789-6299. A live person answers, 24/7. We’ll schedule a free measure and estimate, give you a written price before any work starts, and when the job is done, you’ll find your floors clean, your gate swinging true, and a photo of the clean-up on your phone.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Tampa, serving Pinellas Park with the Cedarwell C.A.R.E. values since 2009.