Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Pinellas Park
Gate repair in Pinellas Park usually means one of three things: a gate that won’t open, a gate that won’t stay shut, or a gate that sags so badly it scrapes the driveway. Most standard hinge and latch repairs run between $120 and $320, and we can usually get a technician to your Pinellas Park home the same day you call. That’s what we do at Latch and Post Gate Repair Tampa: gates. Not fences, not general contracting, just the latch that holds the gate and the post that carries it. Call (850) 789-6299 and a live person picks up, any hour, any day.
We’ve worked on gates all over Pinellas Park: the concrete block homes off Park Boulevard, the manufactured home communities near 49th Street, the commercial properties lining 66th Street. The one thing they all share is the salt. It gets into everything, and it works fast. Which is why we stock galvanized posts, stainless hinge fixings, and replacement opener boards for the brands families around here actually have on their vehicles and driveways.
Why Latch and Post Gate Repair Tampa Is Pinellas Park’s Preferred Gate Repair Company
We’re part of the Cedarwell family of independently owned gate specialists, and we’ve been doing this since 2009. The name tells you what we focus on: every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job. Nothing else.
What Pinellas Park homeowners tell us matters to them is not just whether the gate opens afterward. It’s whether the technician wore shoe covers inside the house. Whether the drop cloths went down before the hinge post came apart near the front door. Whether the price was written down before any work started. Those things are not upsells with us. They’re the Cedarwell Care Promise, and they happen on every single visit, no exceptions.
Cody Beckman runs our gate repair team, and he trains every technician on the same routine: written price first, shoe covers and drop cloths second, a photo of the clean-up before we leave. If a job isn’t right, the 365-Day Done Right Promise covers it. No argument, no fine print. You call, we come back and fix it.
Styles & brands we work with
Gate Welding in Pinellas Park
Gate welding in Pinellas Park is often the difference between replacing a gate panel and keeping the one you have for another decade. The salt air near Tampa Bay works on welds first: it thins the metal at the joint, the paint flakes, and stress fractures open up where the gate flexes each time it opens. On older tubular steel and chain-link gates along 62nd Avenue and around the mobile home parks, we regularly see bottom welds that have rusted through from the inside, where moisture and salt collect and never dry. Standard gate welding repair in Pinellas Park runs between $180 and $450 depending on how many joints need attention; full weld-and-reinforce jobs on longer custom gates can reach $600 to $950.
When Welding Makes Sense Over Replacement
A rusted weld does not automatically mean a new gate. If the metal around the joint is still thick enough to bite, we grind back to clean steel, re-weld with a root pass, and add a reinforcing gusset where the gate flexes. On painted gates we’ll match the finish closely enough that the repair disappears. On galvanized chain-link frames, we use cold-galv spray on the repair and tell you exactly how long it needs to cure before the next rain. If you’re not sure, we’ll say so and show you why, with the price for both paths written down before you choose.
Commercial Gate Repair in Pinellas Park
Commercial gate repair in Pinellas Park runs on a different failure clock than residential work. The entry gates on 66th Street, the rear service gates behind warehouses off Bryan Dairy Road, the apartment community gates near Mainlands: those gates cycle dozens of times more each day than a home gate, and the humidity in Pinellas Park corrodes operator boards at the terminal connections. Commercial gate repair here typically runs $250 to $700 for board-level fixes and loop detector work, and $500 to $1,400 for operator replacement or rail and roller repairs on slide gates.
Loop Detectors and Humidity Failures
A commercial gate that stops halfway is often not the motor. It’s the loop detector reading a false signal from corroded connections or a shifting saw cut in the asphalt. The high water table under much of Pinellas Park means loop wires live in ground that never fully dries. We test the loop frequency first, then the board, then the mechanicals – in that order, because that’s what actually fails in this soil.
Scheduled Service for Property Managers
If you manage an apartment community or commercial lot in Pinellas Park, we can set a maintenance cadence: inspect hinge posts for rust at the base, check the operator board for terminal corrosion, adjust the safety edges, and photograph everything so you have a record. One visit, one written report, one invoice. It costs less than an emergency call at 9 p.m. on a Friday, which is when gate failures always seem to happen.
Trusted Brands We Service in Pinellas Park
Our factory training covers LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters here because many older Pinellas Park gates run on LiftMaster or DoorKing operators that are no longer current production, and the right replacement board or limit switch is not a universal part. We keep common LiftMaster and Mighty Mule components in local stock, so we’re not waiting a week on a distributor while your gate sits open. Every technician is background-checked and uniformed, and every job starts with a written price.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Pinellas Park Homes
- Sagging gates and hinge-post lean. The ground here sits just a few feet above the water table, so post footings shift with seasonal saturation. A gate that catches the driveway after a week of rain usually has a post that’s moved, not a hinge that’s worn out.
- Rusted hinge posts at the base. Sprinkler runoff keeps the footing wet while salt air gets into the paint at grade. The post rots just above and below the concrete, and the gate starts to sag and scrape. We dig out the footing, set a new galvanized post, and use stainless fixings so it doesn’t come back next season.
- Opener boards failing in summer humidity. High humidity corrodes terminal connectors and tiny board traces over time. The gate works fine in winter, then starts throwing error codes or stopping mid-travel in August. We clean and reseal terminals where possible, and replace the board when the corrosion has gone too far.
- Weld fractures on older steel gates. Chain-link and tubular steel gates on 1950s and 1960s concrete block homes have decades of rust thinning the metal at the joints. The flex from years of use opens cracks at the welds. We re-weld where the surrounding metal is sound, and tell you plainly if a panel has reached the end of its life.
Pricing for Gate Repair in Pinellas Park, FL
A standard hinge and latch repair in Pinellas Park runs $120 to $320, including the written price before we begin. Gate realignment jobs, where we reset a post or retension hinges, typically land between $180 and $400. Electric gate repair runs wider: $200 to $550 for most opener diagnostics, limit switches, and safety sensor replacements, and $500 to $1,100 for a new board or motor. Gate welding sits at $180 to $450 for typical repairs. Full replacement gate installations start around $900 for a simple walk gate and run from there based on width, steel gauge, and whether it’s a swing or slide design. Every quote is in writing before any work starts, and the price you sign is the price you pay. Call (850) 789-6299 for a free estimate.
We Also Serve Cities Near Pinellas Park
Our Gate Repair team covers Pinellas Park and the surrounding communities, including Tampa, Riverview, Seffner, and Tarpon Springs. If you’re in one of those areas and need gate work, the same written-price promise and Cedarwell Care Promise apply. You can read more about our local coverage on the Pinellas Park page.
Serving Pinellas Park, FL - Our Local Coverage Area
We’re based in the Pinellas Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pinellas Park
Because the ground under your gate post is moving. Pinellas Park sits only a few feet above the water table, and when the summer rains saturate the soil, the footing shifts enough to tilt the post and let the gate drop. We fix this by digging out the old footing, setting a new galvanized post below the saturated layer, and packing it with concrete that can actually cure in wet soil. Give us a call at (850) 789-6299 and we’ll tell you if it’s a re-footing job or a simpler hinge adjustment.
The board terminals are corroding. Pinellas Park’s summer humidity gets into the opener housing, and the corrosion builds at the connection points until the resistance trips error codes when the air is warm and damp. In winter the air dries out enough that the gate behaves again. We’ll pull the cover, show you the corrosion, clean what’s cleanable, and replace the board if the traces are gone. A board replacement typically runs $400 to $900 on LiftMaster units, and you’ll see the exact number in writing before we start.
Usually yes. If the post is rusted at the base but the panel metal is still sound, we cut the old post out, set a new galvanized post, and re-hang the gate with stainless hinges and fixings. That runs $180 to $400 in Pinellas Park for a standard walk gate, and more for a wider driveway gate. If the panel itself has rusted through at the welds, we’ll weld-reinforce it or tell you straight if replacement is cheaper than patching. The quote is in writing either way.
That’s actually the first thing we check. Loop detectors under Pinellas Park asphalt sit in ground that never fully dries due to the shallow water table, and the moisture shifts the loop frequency enough to make the operator think a vehicle is still sitting on the loop. We test the loop reading first, then the operator board, then the mechanicals. Call (850) 789-6299 and describe what the gate does – we’ll bring the right diagnostic equipment the first time.
For any new gate within a couple miles of Tampa Bay, we specify galvanized steel with stainless fixings as the minimum, and powder coating on top of the galvanizing if you want a color other than silver. Painted mild steel is cheaper up front but the paint fails at the weld points and hinge mounts within three to five years in this salt air. A new galvanized walk gate in Pinellas Park starts around $900 installed; a driveway gate runs from $1,800 up depending on width and swing versus slide design. We’ll quote both options so you can choose.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Tampa, serving Pinellas Park since 2009.