Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across St. Petersburg
Gate installation in St. Petersburg usually costs between $1,800 and $6,500 for a standard driveway gate, and $2,400 to $9,800 when you add an automatic opener. Those figures reflect what we quote across Pinellas County on a regular basis. If you live off 4th Street N in Historic Kenwood, on a brick-paved alley in Old Northeast, or in a 1950s concrete block ranch in Disston Heights, your yard almost certainly has one of two layouts: a front driveway gate you inherited from the original build, or a rear alley gate that takes daily abuse. Either way, you’ll want a written number before any concrete gets poured. Call us at (850) 789-6299 and we’ll send a tech to your St. Petersburg home to measure and price the job on the spot.
Gate Installation Services in St. Petersburg
Gate Installation Services in St. Petersburg start with the ground under the gate, not the gate itself. The city’s sandy soil and the habit of reusing 60-year-old hinge post footings on concrete block piers mean a new gate can sag within months if the footing isn’t addressed. This page is about how we handle that and what it costs. Continue reading for the St. Petersburg-specific details.
Driveway, Pedestrian, and Sliding Gates
Driveway gates on St. Petersburg homes are often swing gates that hang from original iron posts. Pedestrian gates separate the front yard from the alley. Both types need footings that survive summer thunderstorms, and we’ll tell you if the existing footing can be reused or needs to be re-poured. If your driveway comes in from a brick alley with no room to swing a gate inward or outward, a sliding gate is the practical answer. We measure for the slide travel, check the brick pavers for binding issues, and quote the job in writing before any work begins.
Double Gates and Security Gates
Double gates suit wide driveways on larger corner lots in neighborhoods like Shore Acres or Snell Isle. A security gate on a St. Petersburg home often pairs a keypad or intercom with the gate operator, because most families want delivery drivers and guests to have a code rather than a remote. We install both, and we stock common hardware for LiftMaster and Mighty Mule in St. Petersburg openers in our local service van so a replacement part doesn’t mean waiting two weeks.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Styles & brands we work with
Electric Gate Installation in St. Petersburg
Electric Gate Installation in St. Petersburg means adding an automatic opener, safety photocells, and a control board to a new or existing gate. Expect to pay $2,400 to $9,800 depending on operator brand, gate size, and whether we’re also setting new post footings. Salt air from Tampa Bay will kill a control board that isn’t sealed against corrosion, so we apply marine-grade sealant and dielectric grease at every connection point. It’s not an upsell; it’s standard practice here. Continue reading for the St. Petersburg-specific details.
Operator Selection and Wiring
For an alley-fed St. Petersburg lot with limited swinging geometry, a slide gate operator like a Linear rack and pinion or a FAAC hydraulic unit is the safest choice. We pull the low-voltage wiring from a dedicated GFCI-protected circuit. The electrical connection should be a home run from the panel, because St. Petersburg’s frequent lightning storms will find any weak link in a spliced line.
Safety Edges and Entrapment Protection
Every automatic gate we install in St. Petersburg includes UL 325 entrapment protection: photo eyes, reversing edges, and a warning placard. If you have kids or a dog that uses the alley, we’ll show you exactly where the photo eyes sit and how the reversing edge works. We also check the gate’s force threshold so it stops and reverses with the weight of a child, not just a vehicle. If the installation isn’t right, the Gate Installation team comes back under the 365-Day Done Right Promise.
One thing to know about St. Petersburg’s building stock: many of the city’s 1950s and 1960s concrete block homes have stucco piers that were never engineered to carry an automatic operator. A swing gate can be mounted to a rebuilt pier; a slide gate needs a new concrete pad for the track and operator. The pier’s existing footing may have washout from decades of heavy summer rain, and on a salt-air lot, reusing corroded anchor bolts is a false economy. We’ll tell you if your pier can be reused or not, with a specific reason.
We installed a dual slide gate for a shared driveway in Historic Kenwood where a swing gate would have blocked the alley. The original iron hinges had corroded into the stucco pier, so we set new post footings, mounted a Linear rack and pinion operator, and added safety photocells and a keypad entry so both neighbors could come and go without backing into the alley. The cleanup included a photo of the brick paver path after we finished. That’s the C.A.R.E. routine: ask before we move or touch anything, clean up like it’s our own home, and explain the price before the work.
Because St. Petersburg’s dense grid of mid-century concrete block homes and brick-paved alleys means gates often sit on shifting sandy soil and face salt-air corrosion from the Gulf, rusted hinges, sagging frames, and corroded automatic openers are the most common repair calls we see here. It’s a condition amplified by coastal humidity and aging infrastructure, and it shapes how we engineer every new installation in St. Petersburg.
Why Latch and Post Gate Repair Tampa Is St. Petersburg’s Preferred Gate Installation Company
Latch & Post Gate Repair has been part of the Cedarwell family since 2009, and Cody Beckman runs the team here. We’re not a general handyman service; we only do gates. Gate Repair - St. Petersburg, gate installation, and electric gate repair. That focus means we carry the right parts and we don’t have to learn your gate brand on your dime. We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a St. Petersburg homeowner calls about a sagging iron gate on a Historic Kenwood property, our techs know the original ornamental iron from the 1920s often has custom hinges you can’t order from a catalog. We weld the repair without changing the look.
Every call to us is answered by a live person, 24 hours a day, seven days a week. That matters when a gate fails at 9 p.m. on a Sunday in Pinellas Point and you need to know whether to leave the car outside overnight. We’ll talk to you directly. And before any work starts, you get a written price. Not an estimate you have to chase. A number in writing, with the scope of the work, before we touch anything. On every visit, our techs wear shoe covers and put down drop cloths inside the home, and they send you a photo of the clean-up before they leave. No extra charge. If the installation isn’t right, the 365-Day Done Right Promise means we make it right. No argument, no fine print.
Trusted Brands We Service in St. Petersburg
We install and service LiftMaster and FAAC operators most often in St. Petersburg, because those two brands handle the alkaline, salty air better than most when sealed correctly. We also support BFT and Mighty Mule, which appear often on smaller pedestrian gates and rear alley gates across the city. Our local vans carry common control boards, remote transmitters, and safety edge replacements for these brands, so when a lightning strike takes out a board in the summer, we’re not starting from zero. If your gate has a brand we don’t list, we’ll tell you on the phone call, and we’ll point you to the right specialist rather than experiment on your property.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in St. Petersburg Homes
- Post footing washout on sandy soil: Heavy summer thunderstorms saturate the sandy fill under many St. Petersburg driveways, and if the old hinge post footing is reused, a newly installed swing gate can sag within a few months. We always inspect the footing and tell you before we hang anything off it.
- Salt-air corrosion on new operators: A brand-new gate opener on a lot near Tampa Bay or Boca Ciega Bay can seize within a year if the installer skips dielectric grease and marine-grade seals on the control board. We treat every outdoor electrical connection as if it will be sprayed with salt water, because on a windy day here, it effectively will be.
- Restricted alley working space leading to mis-measured slide gates: On brick-paved alleys in neighborhoods like Old Northeast or Kenwood, a slide gate that isn’t measured carefully will bind on the pavers or leave a pedestrian gap when closed. We measure the actual travel path, including the uneven brick surface, before we order a slide gate.
- Shared driveways and right-of-way access: Many older St. Petersburg lots share a driveway easement with a neighbor. Installing a gate on a shared driveway without coordinating with the other household and preserving vehicle and pedestrian access creates a legal and practical mess. We talk through both neighbors’ access needs before we pour the pad.
Pricing for Gate Installation in St. Petersburg, FL
What you’ll pay for gate installation in St. Petersburg depends on gate type, operator brand, and whether we’re rebuilding a post footing. A standard single driveway swing gate on new posts runs $1,800 to $3,400. A pedestrian gate off the alley usually lands between $900 and $2,200. Double driveway gates run $3,200 to $6,500. Add an automatic operator and you’re at $2,400 to $5,500 for a single swing gate, and $4,000 to $9,800 for a double or slide gate with wiring, photocells, and a keypad. The biggest variable in St. Petersburg is the footing: if we have to set a new concrete pad for a slide gate or rebuild a stucco pier for a swing gate, that adds $600 to $2,200 depending on access and pier size. Every quote is written, itemized, and handed to you before any work begins. Estimates are free. Call (850) 789-6299 for an exact price.
We Also Serve Cities Near St. Petersburg
Our Gate Installation team covers St. Petersburg and the surrounding Pinellas and Hillsborough communities including Tampa, Brandon, Riverview, and Pinellas Park. Scheduling is coordinated from our South Florida office, and crews serve St. Petersburg locally. Call us for a free estimate wherever you are in the area.
Serving St. Petersburg, FL - Our Local Coverage Area
We’re based in the St. Petersburg area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in St. Petersburg
Because the answer changes the entire engineering. A street-facing driveway usually has room for a swing gate. An alley-loaded driveway, common in St. Petersburg’s older grid neighborhoods, often doesn’t. The alley is narrow, the brick pavers are uneven, and the hinge post is often set into a 60-year-old concrete block pier that’s seen decades of washout. If your driveway enters from the alley, we’re usually recommending a slide gate on a new concrete pad with the operator mounted to the side, not the rear. That’s not because slide gates are better. It’s because a swing gate on your alley would block the neighbor’s access or bind on the pavers. The question tells us which geometry we’re working with before we measure. Call (850) 789-6299 and tell us if you’re on the alley. We’ll walk you through what changes.
Usually yes, but the original iron hinges are often the weak point. In Historic Kenwood and Old Northeast, many driveways have ornamental iron gates from the 1920s or 1930s. The gate itself is often worth keeping; the hinges and anchor bolts are often rusted to the point of failure. We can keep the original gate panel, weld or sleeve the hinge mounts, set new anchor bolts into the pier, and install an operator that works with the existing gate’s weight. We’ve done this on multiple shared driveways in Kenwood. The key is that we don’t touch the historic look. We match the repair to the original profile and finish. You’ll see a photo of the finished gate and the clean-up before we leave.
UL 325 is the standard for gate operator safety, and for any automatic slide gate in St. Petersburg, it’s a legal and practical minimum. It means the gate must have photo eyes that detect a person or pet in the gate path, a reversing edge or similar mechanism that stops the gate if it contacts something, and a clearly visible warning placard. It also sets limits on the gate’s speed and force so it can’t crush a child or a dog. Every slide gate we install in St. Petersburg includes these protections, and we test them in front of you before we call the job done. If you’re buying a home with an older automatic gate that lacks photo eyes, call us. That’s a safety issue we’ll address immediately.
If your driveway is short and opens directly to the street with room to swing inward, a swing gate is the cleanest and least expensive option. If your lot in Old Northeast has a brick-paved alley at the rear, a slide gate is usually the only option that preserves both vehicle and pedestrian access. Slide gates don’t require swing arc; they travel along a ground track off to one side. On a 50-foot-wide lot with a 12-foot driveway, a slide gate needs 12 to 14 feet of side clearance to open fully. On many Old Northeast lots, that side clearance doesn’t exist, and a swing gate with a rebuild hinge post is the answer. We’ll measure and tell you what works on your specific lot. Call (850) 789-6299 for a free measure.
We start with marine-grade sealant on every outdoor control board and dielectric grease on every electrical connection. We also mount the operator and control box so they shed water rather than pool it. We specify galvanized or powder-coated posts for coastal lots in St. Petersburg, and we run a dedicated GFCI-protected circuit from the panel. Salt air will still wear on the metal, but a properly sealed and grounded installation will last years longer than a standard one. We also include a yearly visual check reminder at no charge. If your operator fails within the first year and it was our install, we make it right under the 365-Day Done Right Promise.
If you’re in St. Petersburg and need a gate installed, need a gate that has failed repaired, or want to automate the gate you already have, call (850) 789-6299. A live person answers, day or night. We’ll give you a written price before any work starts, and if it isn’t right, we’ll make it right. That’s the whole promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair Tampa, serving St. Petersburg since 2009.