Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Tampa?
Gate Repair in Tampa, FL typically costs between $175 and $675 for most common fixes in 2026, with the average job landing around $325. Simple mechanical repairs like latch replacement or hinge tightening run $125 to $250, while electric gate motor and control board work runs $450 to $1,200 or more depending on the brand and access. You’ll get an exact written price before any work starts when you call (850) 789-6299 for a free estimate.
Gate Repair Cost Breakdown (2026)
Here’s what Tampa homeowners can expect to pay for Gate Repair Near Me in Tampa, FL this year. These numbers reflect what we see across South Tampa, Carrollwood, Westchase, Brandon, and Seminole Heights on a weekly basis.
| Repair Type | Typical Cost Range | What’s Included |
|---|---|---|
| Gate latch or lock replacement | $125 – $250 | New hardware, alignment, testing |
| Hinge repair or replacement | $150 – $350 | Heavy-duty hinges, sag correction |
| Post straightening or resetting | $300 – $800 | Concrete work, post bracing, realignment |
| Swing gate wheel or roller replacement | $90 – $220 | New wheel assembly, bracket adjustment |
| Electric gate control board replacement | $400 – $900 | Board, programming, safety sensor check |
| Gate opener motor replacement | $500 – $1,200 | Motor, mounting, limit adjustment |
| Track realignment (sliding gates) | $200 – $500 | Track repair, gate leveling |
| Full welded gate repair (structural) | $450 – $1,100 | Welding, reinforcement, repainting if needed |
What moves the price up or down? The gate’s material matters a lot. Aluminum and tubular steel gates are lighter and easier to work on than solid iron or custom wood gates, which can add $100 to $400 to labor. Access is another factor: a gate that’s rusted shut or blocked by overgrown Tampa landscaping takes longer to free. And electric gates always cost more than manual ones because parts like circuit boards, keypads, and photo-eye sensors each carry their own replacement cost.
What Affects Gate Repair Pricing in Tampa
- Gate material and weight. A lightweight aluminum drive gate costs less to repair than a 400-pound ornamental iron gate. Heavier gates need heavier hinges, stronger posts, and sometimes a second technician to lift and align safely.
- Manual vs. electric system. Electric gates include motors, control boards, remote receivers, and safety sensors. Any one of those components adds parts cost. A simple manual latch fix won’t touch those systems, so the bill stays low.
- Corrosion from coastal air. Homes in South Tampa, Davis Islands, and anywhere within a few miles of the bay deal with salt air that accelerates rust on hinges, bolts, and gate frames. We regularly replace rusted hinge pins and seize-frozen latch assemblies that wouldn’t fail this fast inland.
- Post condition. Tampa’s sandy soil shifts with heavy summer rain, and gate posts slowly lean. If the post itself is cracked or rotten (for wood posts) or the concrete footing is crumbling, the fix moves from a hardware swap into structural work.
- Brand of opener and parts availability. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule each have their own parts pricing. Some control boards are universal; others are brand-specific and take longer to source, which affects the final number.
- Urgency and timing. Same-day calls cost the same honest rate, but if a storm has knocked out power to a dozen gates across the area, wait times can stretch. We answer the phone live 24/7 and give you a straight answer on when we can be there.
How Much Does It Cost to Fix a Sagging Gate in Tampa?
Fixing a sagging gate in Tampa usually runs $150 to $400. The fix depends on the cause: a stretched hinge, a bent hinge bracket, or a post that has leaned out of plumb. Our Hinge & Post Repair service covers all of these issues. In sandy-soil neighborhoods like Riverview and Apollo Beach, we see posts drift after heavy rain seasons, and the repair often includes resetting the post footing or adding an anti-sag brace kit. Latch & Post technicians bring the gate back to level, test the swing, and leave you with a written record of what was done.
How Much Does Electric Gate Repair Cost in Tampa?
Electric gate repair in Tampa ranges from $250 for a sensor or keypad replacement up to $1,200 for a motor rebuild or full opener swap. Control board failures on brands like FAAC and BFT typically land between $400 and $900 installed. We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the right diagnosis happens on the first visit rather than after three rounds of trial-and-error parts. If your opener hums but won’t move, or the gate reverses mid-cycle, call (850) 789-6299 and we’ll talk through what you’re seeing.
How to Save on Gate Repair
You don’t have to overspend to get a gate working right. Here’s what actually helps keep costs down:
- Fix small problems early. A gate that scrapes the ground or needs a hip-check to latch is telling you something. Catching a worn hinge at $150 beats replacing a bent post at $700 later.
- Ask about lubrication and adjustment during the visit. When a technician is already at the property, a quick adjustment on the latch or a shot of cold-weather-resistant lube on the hinges is cheap compared to scheduling it separately later.
- Keep the gate track and hinges free of debris. Tampa’s oak leaves, sand, and summer storms fill tracks and rust hinges. Five minutes of clearing the track every month prevents most binding issues we see in Carrollwood and Temple Terrace.
- Compare repair vs. replace honestly. If a gate is 20 years old, rusted through at the frame, and the opener is original too, multiple repairs may cost more than a fresh install. We’ll tell you straight when replacement makes more financial sense – and we only charge you the service visit, not a sales commission pitch.
- Get a written price before the work begins. This is included with every Latch & Post visit. You’ll see exactly what you’re paying before we touch a single bolt, and that number doesn’t change unless we call you first.
Free estimates are available – call (850) 789-6299 and we’ll schedule a time that fits your week.
Common Gate Repair Problems in Tampa
Sagging or Dragging Gates
After a few years of Florida humidity cycles and sandy soil movement, the gate leans and scrapes the driveway or pavers. We straighten posts, replace hinge hardware with heavier-grade steel, and in many cases install anti-sag diagonal brace kits. Homes around Palma Ceia and Hyde Park, where gates are older and driveways are often brick, see this often.
Gate Won’t Open or Close Fully
Sometimes it’s a bound-up hinge, other times a misaligned photo-eye or a dead limit switch in the opener. Electric gate diagnosis on a LiftMaster or Viking system typically takes under an hour to pin down. We test the safety sensors as part of every electric repair because a gate that closes on a child or pet is the one thing nobody can afford to get wrong.
Remote or Keypad Not Working
A keypad that won’t respond is often a wiring issue, a failed receiver board, or a dead backup battery. Our Lock Repair service handles these problems Replacing a receiver costs $150 to $350; a full keypad swap runs $250 to $450. We pair remotes on-site and test the gate through three full cycles before we call it done.
Rusted Hardware or Broken Weld
Salt air near Bayshore Boulevard and Beach Park eats untreated gate hardware in a few seasons. We grind out broken welds, re-weld with galvanized or painted steel, and replace hinges with corrosion-resistant models. A simple hinge replacement often restores smooth operation for less than $200.
Gate Post Leaning or Loose
When the post moves, the whole gate follows. We dig out the old footing, reset the post in fresh concrete, and brace it while it cures. In Tampa’s rainy season, we use fast-setting concrete mixes to cut the downtime. A loose post on an otherwise good gate is usually a $300 to $600 fix.
Is It Cheaper to Repair or Replace a Gate in Tampa?
Repair is cheaper when the damage is isolated to one component: a hinge, a latch, a wheel, a sensor. Those jobs usually stay under $400. Replacement makes sense when the frame itself is rusted through in multiple spots, the cost of metal repair exceeds 60% of a new gate’s installed price, or the gate has shifted structurally so badly that no reasonable repair will hold. We quote both paths in writing so you can decide with real numbers, not pressure.
How We Work at Latch & Post
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. Latch & Post Gate Repair has been part of the Cedarwell family of independently owned and operated gate specialists since 2009, and we’ve spent that time doing one thing: fixing gates right the first time.
When a Latch & Post technician arrives, they’ll be in uniform, background-checked, and carrying a written price sheet. We lay drop cloths on the floor and put on shoe covers before we step inside – your floors stay clean. We choose pet-safe lubricants where there’s a choice, and we can schedule around nap time if quiet matters. Our technicians work under the Cedarwell C.A.R.E. values: Clean up like it is our own home; Ask before we move or touch anything; Respect the family’s time and quiet hours; Explain the price before the work. Before the tech leaves, you’ll have a photo of the clean-up and a gate that works.
Every repair and installation is backed by the 365-Day Done Right Promise. If it’s not right, we make it right. No argument, no fine print. And when you call (850) 789-6299, a live person answers – around the clock, nights, weekends, and holidays included. No voicemail queue, no callback wait.
How the Repair Process Works
- Call and describe what’s wrong. You talk to a live person, not a robocall. Tell us what the gate is doing (or not doing), what brand of opener you have if it’s electric, and when the problem started.
- We diagnose on site. A background-checked, uniformed technician arrives at the scheduled time. They inspect the gate, opener, hinges, and posts, and identify the exact cause. No guesswork, no “try this and see.”
- You get a written price. Before any work starts, you’ll see the full cost in writing. We explain what needs fixing, what parts are needed, and what it will cost. No pressure, no hidden add-ons.
- We complete the repair. Most common gate repairs are done same-visit since our trucks carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.
- Clean-up photo and Done Right Promise. The technician cleans the work area, shows you the clean-up photo, and walks you through the 365-Day Done Right Promise before leaving.
Gate Brands We Service in Tampa
Our technicians are factory-trained on the gate opener and hardware brands Tampa families actually own. If your system falls under one of these names, we have the parts and programming knowledge to fix it on the first visit:
- LiftMaster and Elite: common in residential swing and slide gates across Westchase and New Tampa.
- FAAC and BFT: hydraulic and electromechanical openers seen on heavier ornamental gates in South Tampa and Davis Islands.
- Linear and Viking: frequent in apartment and HOA entry gates around Brandon and Riverview.
- Ghost Controls and Mighty Mule: popular DIY-installed openers on farm gates and ranch gates in the outer Tampa areas. We repair and upgrade them often.
- DoorKing: a mainstay for commercial and high-traffic entry systems, which we service across the Tampa area.
If your opener is from a brand not on this list, call anyway. We’ll tell you honestly whether it’s something we can source parts for, and we won’t waste your time with a service call if we can’t do the job right.
Key Takeaways: Gate Repair Cost in Tampa
- Most gate repairs in Tampa cost between $175 and $675, with the average around $325.
- Simple latch and hinge fixes run $125 to $350; electric opener and control board work runs $450 to $1,200.
- Coastal air, sandy soil, and summer storms all accelerate gate wear in Tampa neighborhoods.
- You’ll always get a written price before work starts with Latch & Post – no exceptions.
- Free estimates are one call away at (850) 789-6299.
FAQs – Gate Repair Cost
How much does gate repair cost in Tampa?
Gate repair in Tampa averages $175 to $675, with most jobs landing around $325. Simple mechanical repairs like a latch or hinge replacement run $125 to $350, while electric opener repairs run $450 to $1,200. Call (850) 789-6299 for a free written estimate on your specific gate.
How much does it cost to fix an electric gate opener?
Electric gate opener repair in Tampa runs $250 to $1,200. A sensor or keypad replacement usually costs $250 to $450, while a control board swap runs $400 to $900 and a full motor replacement runs $500 to $1,200 depending on the brand. Latch & Post technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the diagnosis is accurate the first time.
Can you fix a sagging gate without replacing it?
Yes, most sagging gates can be repaired for $150 to $400 by replacing worn hinges, adding an anti-sag brace kit, or resetting a leaning post. Replacement only makes sense when the gate frame itself is rusted through or structurally compromised. We’ll show you both options in writing before you decide.
Is it cheaper to repair or replace a gate in Tampa?
Repair is cheaper when damage is limited to one component, typically under $400. Replacement is the better choice when the frame is rusted through in multiple places or repair costs exceed 60% of a new gate’s installed price. Latch & Post quotes both paths honestly so you can compare real numbers, not a sales pitch.
Can you come today for a gate repair in Tampa?
In many cases, yes. We answer calls live 24/7 and schedule same-day visits when our technicians’ routes allow. Standard service visits are free to estimate, and the written price you get before the work starts is the price you pay. Call (850) 789-6299 and we’ll tell you straight when we can be there.
Ready to get your gate working right? Call Latch & Post Gate Repair Tampa at (850) 789-6299 for a free estimate. A live person answers around the clock, and every visit comes with a written price before work begins, shoe covers and drop cloths inside your home, and the 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Tampa, serving Tampa since 2009.
Pricing reflects the Tampa market as of 2026. Latch and Post Gate Repair Tampa offers free estimates – call (850) 789-6299.
What Our Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco