Electric Gate Repair in Tampa - Fixed Today, No Surprise Invoice

Fast, Reliable Electric Gate Repair Across Tampa

Electric gate repair in Tampa typically costs $220 – $640 for opener and control board work, and $180 – $380 for keypad, remote, and safety sensor fixes. Most repairs in Tampa are completed the same day or within 24 hours, depending on parts availability. The heat, humidity, and salt air off Tampa Bay are hard on gate hardware here, and we’ve spent years learning exactly which components fail first and how to keep them running.

Call (850) 789-6299

When your gate won’t open at 7 a.m. and the kids are late for school, you need a technician who knows Tampa’s gates and the weather that works against them. We serve the whole Tampa area, from Hyde Park bungalows with 1930s wrought iron to gated subdivisions in Westchase with aluminum slide gates. Call us at (850) 789-6299 for a free estimate.

Why Latch and Post Gate Repair Tampa Is Tampa’s Preferred Electric Gate Repair Company

Since 2009, Latch & Post Gate Repair has been part of the Cedarwell family of independently owned and operated gate specialists. We focus on one thing: gates. Not garage doors, not fencing as a side gig. Gates. That narrow focus means our Tampa technicians have seen the specific ways salt air, lightning, and humidity break gate operators here, and they arrive with the right parts on the truck.

Our Tampa customers regularly tell us the same thing: what stood out wasn’t just the repair. It was that the technician laid drop cloths on the driveway before setting down tools, put on shoe covers before stepping inside, and sent a photo of the cleanup before leaving. Those aren’t upsells here. They’re the Cedarwell Care Promise: written price before work starts, shoe covers and drop cloths on every visit, and a cleanup photo before departure. Every job is covered by our 365-Day Done Right Promise. If the repair isn’t right, we make it right. No argument, no fine print.

Cody Beckman, who leads our Tampa team, trains every technician on the brands families here actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. A live person answers our phone 24/7, including nights and weekends. Dispatch and scheduling are coordinated from the brand’s Miami (South FL) office, and our crews serve Tampa locally.

Gate Opener Repair in Tampa

Gate opener repair in Tampa usually means replacing a burned control board, a seized motor, or a corroded limit switch, and it typically runs $250 – $640 depending on the opener brand and whether we’re working on a swing or slide gate. Tampa’s afternoon thunderstorms send power surges through gate opener circuits all summer, and the control board is usually the first component to fail. In waterfront neighborhoods like Davis Islands and Beach Park, salt air works on the motor housing and wiring connections constantly, which shortens the life of a standard opener by years.

Control Board Failures from Lightning and Surges

We replace more surge-damaged control boards in Tampa between June and September than any other repair. A lightning strike doesn’t have to hit your gate directly. A nearby strike on the grid sends a spike through the opener’s power supply, and the board takes the hit. We install surge suppression at the opener itself and often recommend it at the panel too, which costs an additional $85 – $150 and saves a $300 – $500 board replacement the next time a storm rolls through.

Swing Arm and Motor Replacement

When the gate opens partway and stops, or makes a grinding noise and then quits, the motor or gearbox inside the operator is usually done. In Tampa’s humidity, condensation inside the motor housing accelerates bearing wear. We replace the motor assembly and check the torque settings so the gate doesn’t slam or stall afterward.

Automatic Gate Repair in Tampa

Automatic gate repair in Tampa covers everything from the gate not responding to the remote to the gate reversing on its own mid-cycle, and most jobs land between $180 and $480. A gate that won’t respond usually points to a failed loop detector, a shorted keypad, or a control board that isn’t communicating with the remote receiver. A gate that reverses mid-cycle usually means a misaligned safety sensor or a dying motor capacitor. Tampa’s daily downpours get water into underground operator vaults and push moisture into enclosures, which trips safety photocells and shorts loop detectors on custom gates with below-ground operators.

Safety Sensor and Loop Detector Troubleshooting

Safety sensors and loop detectors are the two most common automatic gate failures in Tampa, and both are made worse by moisture. A sensor that’s been soaked repeatedly will either stop detecting vehicles or throw a false obstruction signal every time the gate closes. We test each component before replacing anything, because a $120 sensor replacement is an easy fix compared to a $500 board swap that might not even be necessary.

Remote and Keypad Entry Repair

If the gate works from the interior button but not from the keypad or the car remote, the receiver or the keypad is the likely culprit. Tampa homeowners in newer subdivisions like Westchase often have a shared gate with a keypad and a phone entry system, and those keypads sit in direct sun and rain all year. We replace keypads, reprogram remotes, and can add new remotes while we’re on site.

Trusted Brands We Service in Tampa

Our Tampa technicians are factory-trained on the gate opener brands that show up most in this market: DoorKing, Elite, Viking, and Ghost Controls, plus LiftMaster, FAAC, BFT, and Linear. We keep common control boards, keypads, and remote kits stocked locally for these brands, which means a Tampa repair doesn’t stall for a week while a part ships from a distributor. That familiar parts inventory helps us get most jobs done on the first visit.

Common Electric Gate Repair Problems We See in Tampa Homes

• Salt-corroded slide gate rack and pinion: In waterfront communities like Davis Islands, the rack gear on slide gates rusts and the teeth start binding. The gate chatters and binds until enough teeth shear off that the gate won’t move at all. We replace the rack with marine-grade stainless steel so the same repair doesn’t come back in two years.
• Lightning-fried control boards in gated subdivisions: Westchase and other newer Tampa communities see a spike in dead keypad entry and stuck-open gates after every summer thunderstorm. The board takes the surge, and the gate won’t respond to remotes or keypads. We replace the board and add surge suppression to stop the next strike from doing the same.
• Moisture-wicked operator enclosures: High humidity and daily downpours pull moisture into gate operator housings across Tampa. That moisture trips safety photocells and shorts loop detectors on custom gates with below-ground operator vaults. We dry out the enclosure, replace the damaged component, and apply conformal sealant to the board.
• Sagging wrought iron gates from rusted hinge posts: In South Tampa’s older neighborhoods, 1920s – 1950s custom wrought iron gates often have non-standard hinge sizes. The hinge post rusts thin, the gate sags and scrapes, and the opener strains to move it. We fabricate replacement hinge components and rebuild the post footing so the gate hangs correctly again.

Pricing for Electric Gate Repair in Tampa, FL

We Also Serve Cities Near Tampa

Our Electric Gate Repair service extends from Tampa out to Odessa, Pinellas Park, Lutz, and Tarpon Springs. If you’re in any of these surrounding communities, the same Tampa-based team handles your repair with the same written pricing and cleanup routine. We come to you, not the other way around.

FAQs About Electric Gate Repair in Tampa