Ghost Controls Gate Repair Nationwide

Ghost Controls Gate Repair in Tampa: What to Know First

We repair Ghost Controls gate systems throughout Tampa, usually within one to three business days of your call. As an independent Ghost Controls service provider, we are not affiliated with the manufacturer, but our technicians work on these operators weekly and carry the common boards, arms, and hardware in the truck. You will see a written price before any work starts, and that price is the price you pay. No surprises on the invoice, no pressure to approve extras.

Call (850) 789-6299

This page is for Tampa homeowners with a Ghost Controls swing gate that will not open, opens halfway, beeps but does not move, or opened fine yesterday and now sits dead. If that sounds like your gate, call (850) 789-6299 and tell us what it is doing. We will schedule a visit, diagnose the system, and give you a straight number.

Key Takeaways

• We are an independent Ghost Controls service provider, not a manufacturer authorized dealer.
• Most Tampa Ghost Controls repairs cost between $140 and $420, depending on the part and labor.
• We stock common Ghost Controls boards, limit switches, and receiver modules in our Tampa trucks.
• Every repair gets the 365-Day Done Right Promise: if it is not right, we make it right.

How Ghost Controls Products Fail – and How We Fix Them

• Ghost Controls AXS1 and AXP1 control board failures after Tampa lightning season. These boards sit in plastic housings that are not fully sealed against moisture, and from June through September, daily thunderstorm humidity and occasional nearby strikes shorten their life. The classic symptom is a console that flashes or clicks but never energizes the motor. We test the board on-site, confirm whether it is the board or the transformer, and replace only the failed component, usually the same visit.
• Ghost Controls TSS1 and TDS1 opener arm limit switch drift. Owners call us because the gate opens too far, bounces off the mechanical stop, or closes short of the latch. On Ghost Controls arms, the internal limit cams can slip, especially on heavy ornamental steel gates. We open the arm, reset the limits to match your actual gate travel, and tighten the cam set screws. It is a $120 to $180 repair most of the time, and it prevents the motor from burning itself out against the stop.
• Keypad and remote receiver pairing loss. Ghost Controls AXDP and AXK keypads, along with their 318 MHz single-button transmitters, are prone to losing programming after brief power fluctuations. The gate works fine from the hardwired button but will not respond to the keypad or remote. We reprogram the receiver, verify every transmitter, and replace the keypad battery. We also show you how to re-pair a remote yourself, in case it happens again at 11 p.m.
• Ghost Controls boards killed by incorrect AC adapter use. Homeowners sometimes plug the operator into an extension cord or a buried line that is not GFCI protected, and the board takes a surge. We check the outlet circuit before swapping any electronics. If we replace a board and do not fix the power source, the new board fails the same way in a few months. We test the outlet, the transformer, and the board together so you pay for a fix, not a repeat visit.
• Beep codes that do not match the manual. Ghost Controls systems beep in patterns: three beeps, five beeps, continuous beeps. The manual lists some codes, but in practice, a repeated five-beep sequence on an AXS1 series often means the motor capacitor is degraded, not a safety edge issue as the manual suggests. We have replaced enough of these in Tampa to know the difference, and we verify with a multimeter before touching anything.

Our Ghost Controls Gate Repair Process

1. 1
   You call us at (850) 789-6299. A live person answers, day or night. You describe what the gate is doing when it fails, and we schedule a visit around your hours, including evenings and weekends.
2. 2
   We arrive, look, and listen before touching anything. Our technician asks where the gate normally stops, when the problem started, and what the beeps sound like. We test the control board, the arm or actuator, the receiver, and the power feed as one system, not four separate parts.
3. 3
   We show you the written diagnosis and price. Before any work starts, you get a line-item quote for the parts and labor. If it is a $40 roller or a $380 board, you see it in writing. No work proceeds until you approve the number.
4. 4
   We repair with OEM or quality aftermarket parts where appropriate. For Ghost Controls boards and limit switches, we generally use Ghost Controls OEM parts to keep revision matching correct. For things like nuts, bolts, and generic keypads, we use dependable aftermarket equivalents and tell you what we are installing and why.
5. 5
   We test the gate through at least 10 full open and close cycles. We watch the limits, check reverse sensitivity at the pinch points, and confirm every remote and keypad is paired. If a safety edge or photo eye is part of your setup, we test that too.
6. 6
   We clean up, photograph it, and explain the warranty. Shoe covers and drop cloths if we step into the garage or house. A photo of the work area before we leave. Then we walk you through what we replaced and answer your questions. Every job carries the 365-Day Done Right Promise.

What Ghost Controls Gate Repair Costs in Tampa

Most Ghost Controls gate repairs in Tampa fall between $140 and $420, depending on the part and what the technician finds inside the operator. You will see the exact number in writing before any work starts.

Price depends on the exact Ghost Controls model, whether the post or hinge needs work at the same visit, and how far we need to run new wiring. We give you a free estimate with a line-item breakdown. Call (850) 789-6299 to schedule a visit.

Why Tampa Homeowners Call Latch and Post Gate Repair Tampa for Ghost Controls Work

We work on Ghost Controls systems constantly, so the repair generally happens on the first visit. That matters when your gate is stuck open at the side of a busy road or stuck closed with your car inside the driveway.

Latch and Post Gate Repair Tampa is part of the Cedarwell family and has been operating since 2009. We are licensed and insured, our technicians are background-checked and uniformed, and every job follows the Cedarwell Care Promise: shoe covers and drop cloths where we step inside, a written price before any work starts, and a cleanup photo before we leave. If the repair is not done right, the 365-Day Done Right Promise covers it. No argument, no fine print.

We work on several gate brands in addition to Ghost Controls, including LiftMaster, Mighty Mule, and DoorKing. If your Ghost Controls system is paired with a different brand keypad or a LiftMaster receiver kit, we can handle all of it in one appointment.

FAQs