FAAC Hinge & Roller Replacement Nationwide

FAAC Hinge & Roller Replacement: The Tampa Owner’s Guide

We stock and install FAAC-compatible hinges and rollers for swing and slide gate systems throughout Tampa, with most replacements running between $140 and $340 installed, depending on the gate’s weight and which hinge position failed. We can usually get to a Tampa home the same day for a hinge or roller swap, and you’ll see the written price before we touch anything.

Call (850) 789-6299

Most Tampa owners discover the problem the same way: the gate starts dragging on the driveway, makes a scraping or popping sound mid-swing, or the gap at the top of the hinge post widens until the gate sags visibly. What they’re hearing is metal grinding against metal because a roller has flattened or a hinge pin has worn into an oval shape. Left alone, that drag forces the FAAC operator to work harder, which is when a $160 hinge replacement becomes a $500 operator rebuild.

Tell me what the gate is doing, and I’ll tell you exactly what it needs.

That’s how Cody Beckman starts every hinge and roller job, because a FAAC gate almost never fails silently. It tells you what’s wrong if you know what to listen for.

Key Takeaways:

• FAAC hinge and roller replacement in Tampa typically runs $140 – $340 installed, with the exact price written down before work starts.
• Most hinge failures on FAAC gates happen at the bottom hinge, where Florida moisture and driveway wash-down sit against the pin.
• We stock FAAC-compatible hinges and rollers on the truck, so the swap usually happens in one visit.
• Every hinge and roller replacement is covered by the 365-Day Done Right Promise: if it’s not right, we make it right, no fine print.

Which FAAC Models This Applies To

FAAC builds hinge and roller hardware for three main swing gate families in residential use: the S418 and S450 hydraulic swing operators, the 391 and 400 series electromechanical operators, and their larger C720/C721 models for heavy gates. The hinge and roller components differ between these lines in two ways that matter for a correct match: the hinge pin diameter (usually 20mm, 25mm, or 30mm, depending on gate weight) and the roller’s outside diameter, which typically runs from 100mm to 160mm.

Here’s the compatibility gotcha we see regularly in Tampa: FAAC hinges are matched to gate leaf weight, not gate width. A 14-foot gate that’s light because it’s built from aluminum tube may use a 20mm pin. The same 14-foot opening with a solid wood or steel-filled gate might call for a 30mm pin and a larger roller. If you swap in a hinge that’s too small, the pin shears eventually, often without much warning. That’s one reason we measure the existing hardware and check the gate’s actual weight before we order or install anything.

On the OEM-versus-aftermarket question: FAAC brand hinges and rollers are well machined and consistent, but they’re priced accordingly. There are quality aftermarket equivalents made to the same millimeter specs, and we’ve installed them on hundreds of Tampa gates with good results. Our policy is simple: we show you the price for both options and let you decide. We won’t push a part the gate doesn’t need.

A note you should have: Latch and Post Gate Repair Tampa is an independent service provider. We’re factory-trained on FAAC equipment, but we’re not affiliated with FAAC. That independence means we can use whatever part is genuinely the right fit for your gate and your budget.

Signs Your FAAC Hinge & Roller Replacement Is Failing

• The gate sags and scrapes at the latch end. When the bottom hinge pin wears, the gate leaf drops at the free end. You’ll see a fresh scrape mark on the driveway or a widening gap above the latch post. That’s the bottom hinge pin losing its shoulder.
• A pop or clunk when the gate starts moving. If you hear a single metallic pop right at the beginning of travel, the hinge pin has likely developed play and is catching before it rotates. FAAC operators push with steady force, and that force exposes worn hinge bores quickly.
• The gate moves slower than it did last year, with no change in settings. A dragging roller turns your FAAC operator’s normal effort into resistance. The motor responds by drawing more current and moving the leaf slower. We see this on Bayshore Boulevard gates, where salt air accelerates hinge roller pitting.
• One hinge looks shinier or darker than the others. Uneven wear shows as a polished spot on the pin or a dark ring of metal dust around the hinge barrel. That dust is the pin grinding down, a little at a time.
• The gate hand-wave or roller mark is no longer in the center of the track. On slide gates, a roller that’s wearing on one edge will track off-center. You’ll see the wheel riding against the side of the rail instead of rolling centered, and the gate will have a subtle wobble.

Replacement Cost & What’s Included

For a residential FAAC swing gate in Tampa, a single hinge replacement runs $140 to $220 installed, including the new hinge, the labor to lift the gate leaf safely, and the adjustment to bring the gate back to level. Full roller replacement on a slide gate runs $220 to $340, depending on how many rollers the gate carries and whether the track needs a deep clean or shimming.

What moves the price within those ranges, in order of impact: gate weight (heavier leafs require lifting gear and more adjustment time), the condition of the post the hinge bolts into, and whether the operator needs a relearning pass after the hardware swap, which on FAAC units can add 20 to 30 minutes. You’ll never see a surprise line item for cleanup or shoe covers: those are part of every visit, covered by the Cedarwell C.A.R.E. values, not an add-on.

Every FAAC hinge and roller replacement includes a written price before work begins, a check of the neighboring hinge and roller positions for early wear, and the 365-Day Done Right Promise. If the gate sags again or the roller chatters within a year, we come back and make it right, no argument.

DIY or Call Us?

Here’s the honest split: if you want to identify which hinge or roller has failed, you can. Look for the sag pattern, the metal dust, the off-center wheel track. Just keep your hands and body clear of the gate leaf while it moves, because a gate that drops off a worn hinge is loaded weight falling without warning.

Where DIY goes wrong is in the lift. A FAAC swing gate leaf often weighs 400 to 900 pounds. Lifting it enough to pull a hinge pin safely requires a proper gate jack or a lifting bar, plus somebody steadying the leaf so it doesn’t pivot and shear the remaining hinge. We’ve seen homeowners in Tampa manage the small stuff and call us for exactly this job after a gate shifted on a scissor jack and bent the second hinge. For the cost of one hinge replacement, a technician with the lift gear and the factory adjustment experience handles it in under two hours.

If you’re in Tampa and your FAAC gate is sagging, scraping, or popping, call (850) 789-6299. Cody or a member of the crew will answer live, day or night. We’ll ask what the gate is doing, tell you what it likely needs, and quote you a written price before any work is approved.

FAQs